Oakwood bespoke colour finish with Pallmann Magic Oil | Art of Clean ~ Art of Clean - UK

I want to share with you the special qualities of Pallmann Magic Oil, which is a great product to use on the installation, renovation and maintenance of wood flooring.

This morning Pierre was mixing a bespoke colour using Pallmann Magic Oil 2K on a sample piece of solid oak wood to show to a customer.

Before applying the oil mix, the wood sample was sanded back using a 60, 80 and 100 grit sanding paper. The wood was also water popped, which means light moisture is used to open the grain, which in turns swells the wood fibres and more colour is accepted into the wood.

The oil is then mixed using 15% black and 85% brown. The oil is applied to the wood and forced into the fibres of wood with a green hand pad and the excess removed.

Oil is forced into the fibres of wood with a green hand pad

The oil is thoroughly worked through the wood

Pierre was using a piece of oak, but Pallmann Magic Oil works well on pine and most other types of wood.

As well as black and brown the other main colours are white, grey, dark brown, red brown and natural .

Some of the benefits of using magic oil, apart from the ones already mentioned are the four hours drying time and so the floor can be used much quicker, as opposed to 12 hours with other brand floor oils.

Once the excess oil is removed the transformation is remarkeable

Magic Oil also comes with a hardener which makes it much harder wearing than many other oils. Also, if the floor is scratched the floor can be easily repaired with simply keying back the area and then apply a re-oil.

In the case of coloured oil, you would need to key back the whole floor.

Below is a previous example using Treatex (left) and Liberon (right).